Any and all help would be so greatly appreciated. I’ve been battling with my laptop to be able to dual-boot Ubuntu Cinnamon and Windows 10 for about four days now. I’ve probably gone down five or six different rabbit-holes of troubleshooting, GRUB command-line fun, reinstalling and updating the BIOS, trying and failing to deal with VMX and locked NVram. As of now, my system boot-loops and fails to run Windows, but paradoxically I am able to get Ubuntu running, which is what I am using now.

I’ll try to provide as much relevant information here as I can:

  • Device: HP ZBook 17, gen 6
  • Primary OS: Windows 10 Home
  • Linux distro: Ubuntu Cinnamon 23.10
  • Ubuntu location: /dev/sda3
  • grub-install --version = 2.12~rc1-10ubuntu4
  • boot-repair Boot-info summary: https://paste.ubuntu.com/p/rxZ3D5GtpP/
  • I’m more than happy to provide more information as it’s requested.

As of now, I am unable to run Windows through the BIOS. If I run via the dedicated SSD as I normally do, it boot-loops, and if I try to go through any other drives it just tells me I need to install an OS. I am currently able to run Ubuntu, but only by going through the following process:

  1. Startup menu
  2. Boot configuration
  3. Boot from EFI > Ubuntu > shimx64.efi

At this point, I am happy with two outcomes to this scenario:

  1. I am able to run my laptop with Windows 10 as the primary OS, with the ability to dual-boot to Ubuntu Cinnamon 23.10.
  2. Assuming option 1 is impossible/requires a Herculean amount of work to pull off from this state, I am willing to scrub Windows 10 from my laptop and move forward with Cinnamon as my daily driver, though I am rather inexperienced in it. I can learn to move forward as I need to and run a VM or WINE for any Windows-specific processes I still need to do. But I would rather keep this option as my dead man’s switch.
  • Kalcifer@sh.itjust.works
    1·
    10 months ago

    Thank you for the breakdown.

    You are very welcome! 😊

    I’m now dedicated Ubuntu

    A very fair decision! Dual booting can be a huge pain, and, for the average user, it really isn’t all that necessary anymore – Linux has come a very long way!

    My problem turned out to be something with the BIOS. I don’t know if a switch got flipped somewhere along the way or what, but when I reset the BIOS to factory default settings in the boot menu I no longer had issues with boot looping and a CPU I could fry an egg on.

    Interesting. I’m curious what the setting was. But, I’m glad that it worked out for you in the end!

    I do believe that GRUB was initially installed on sda2 and not sda

    I refer back to my previous comment – sda2 refers to a partition on the drive named sda. You could have a drive sda, sdb, sdc, etc. If one was given some partition sdc3 that means it is partition 3 on drive sdc. Everything gets installed into a partition on a drive.

    Windows was just taking precidence over grubx64.efi upon startup

    This can certainly happen – especially if Windows is installed after Linux. I woud refer you to this answer to fix it.

    less a few graphical funnies with some larger proprietary software I use.

    Yeah, I’m not too surprised about that (depending on the speicfic graphical issues that you are referring to, mind you) – especially if you are using Wine. If you don’t mind me asking, what software are you wanting/needing to use?

    Funny enough, I tried to do a clean install of Debian with KDE on my system and I went back to having boot issues, mainly where it would just open to GRUB CL and I couldn’t get it to initialize Debian, when I was certain it was a good install.

    Hm, this is strange. I would err on the side of a layer 8 error, but there could certainly be some other fuckery afoot.

    So I’m just going to stick to Ubuntu for a good while and learn it.

    There’s no problem with that! Ubuntu was the first distro that I used, as well, when I first got into Linux. Granted, I didn’t stick with Ubuntu for long, cause I got mildly annoyed with how it worked.

    Once I feel very confident in filesystem maintenance, command line navigation, snap/flatpak/.deb/whatever, all the major things, I’ll start shopping around for another distro again.

    Sounds like a solid plan! When you do decide to move on from Ubuntu, I’d recommend Arch LInux 😜

    • Classy@sh.itjust.worksOP
      1·
      10 months ago

      I refer back to my previous comment

      Yes, I am aware of how the partition naming structure works, to a degree. I am going off the fact that when I installed Ubuntu, it was installed on a partition (sda2) rather than a primary drive (sda). I’ve read that when GRUB is installed, if it gets installed to /dev/sda2 rather than /dev/sda it can cause issues with dual booting as the BIOS will read in a sequential order, and it may miss a partition if it’s “far enough down the list”. As another example, you may be in for some trouble if grubx.efi is installed on /dev/sda8 or something.

      Everything gets installed into a partition on a drive.

      I guess I must have gotten my preconceptions wrong, or perhaps I misread something. From my impression, certain things can be installed on the primary drive such as boot loaders, but I could be wrong.

      If you don’t mind me asking, what software are you wanting/needing to use?

      Finale 2012c is the main software I needed. And by funnies I mostly just mean that it’s slow to update graphics, but the program works entirely as intended. MIDI drivers work, sound libraries (Garritan and ARIA Player) function, print to PDF is fine, I’m actually incredibly impressed! I’m using WINE 8.0.1.

      I also wouldn’t mind trying to get Cakewalk running, as my workflow is definitely more attuned to that software, but maybe trying to get all the proprietary drivers (e.g. TASCAM’s interface drivers) to work with Linux may be more headache than its worth.

      Arch

      I’ve heard it can be pretty challenging to get into Arch, is this true? I don’t know if I’ll ever be a “script kiddie” as it were. I plan on getting good at using bash and learning the other ones like ssh, but I don’t know how much I like the idea of having to hand-craft my OS from bare metal.

      • Kalcifer@sh.itjust.works
        1·
        10 months ago

        when I installed Ubuntu, it was installed on a partition (sda2) rather than a primary drive (sda)

        The exact meaning of the language in use is somewhat context dependent. It is technically possible to use a block device (e.g. /dev/sda) [source] as a filesystem, but it is generally discouraged – afaik, this is generally because of compatibility reasons. As to the meaning of a statement that looks something like “Install Ubuntu to /dev/sda” this could be interpereted as essentially just rewriting the existing partition table that exists on that drive with a new one, where, for example, partition 1 (e.g. /dev/sda1) is for the boot partition, and partition 2 (e.g. /dev/sda2) is where Ubuntu lives. In that example, technically Ubuntu is only resides in /dev/sda2, but, for the whole installation process, the user can interpret it as essentially installing it all to /dev/sda.

        I’ve read that when GRUB is installed, if it gets installed to /dev/sda2 rather than /dev/sda it can cause issues with dual booting as the BIOS will read in a sequential order, and it may miss a partition if it’s “far enough down the list”

        It’s worth understanding the boot process of a system (this is more taylored to an average Linux system, but can be generally applied, if one is careful):

        1. The machine powers on
        2. The BIOS chip on the motherboard comes to life, it gets copied into RAM, and the CPU starts executing it.
        3. It finds the first device in the BIOS boot list
        4. It looks at the first sector (512 bytes) of that drive (this generally only applies if the drive uses MBR, and can be a little bit different with GPT, but the general process is pretty much the same, afaik), which contain the location of the bootloader on that drive, and copies it to RAM at address 0x7C00
        5. The bootloader (e.g. Grub) springs to life and it takes over the boot process from the BIOS
        6. In the case of your average linux installation, Grub will then initialize something called the “initramfs” which is sort of like an extremely small Linux OS that gets loaded into RAM
        7. Initramfs essentially bootstraps the actual Linux distro into booting – this is required as booting the desired Linux distro may depend on things that run on Linux which can’t exist before Linux is loaded (e.g. LVM’s, LUKS encryption, etc.).
        8. Now that the OS is loaded into ram, it boots, and the process is complete.

        So, back to your statement, the actual program of Grub could reside in /dev/sda2, but the “bootloader bootsrapping” program, which resides in the first 512 bytes of the disk, could be thought of as being installed to /dev/sda.

        [source], [source], [source], [source]

        As another example, you may be in for some trouble if grubx.efi is installed on /dev/sda8 or something.

        The only real “hard” limit on the location of Grub is that, in the case of MBR, it necessarily must be located within the first 2.2 TB of the disk.

        [source], [source], [source], [source]

        I guess I must have gotten my preconceptions wrong, or perhaps I misread something. From my impression, certain things can be installed on the primary drive such as boot loaders, but I could be wrong.

        As I outlined above, this is sort of a technicality in language that depends on context.

        Finale 2012c is the main software I needed.

        I’m not sure if this is exactly equivalent to that software, but perhaps you would be interested in MuseScore – it’s open source.

        I’ve heard it can be pretty challenging to get into Arch, is this true?

        This has been somewhat exaggerated through memes by the community, and strange elitism. It’s a bit tough to separate oneself from their curse of knowledge, but if one possesses the motivation to learn, it’s really not that complicated. Depending on one’s existing knowledge, it may initially appear daunting, but the community is quite good, from my experience, and the Arch Wiki is extremely useful. Installation is essentially a matter of just following the installation guide step-by-step.

        I don’t know if I’ll ever be a “script kiddie” as it were.

        Imo, arch has nothing to do with that. If one wants to be a part of that then prob lurking around the Kali Linux communities would be a start. Do note that I am not speaking about Kali Linux from experience, just hearsay, so take that with a grain of salt. But, yeah, Arch is more for people that want more fine-grained control over their system without wanting to get into the full-time job that is something like Gentoo 😜.

        I don’t know how much I like the idea of having to hand-craft my OS from bare metal.

        Imo, that’s not really what arch is – even Gentoo isn’t like that. The closest to that would probably be something like Linux From Scratch. Arch just gives you more freedom to choose the base software that your system is using – stuff like your DE, your networking utils, display server, audio server, etc.

        I would like to emphasize that this kind of choice exists with virtually all Linux distros – as in you can essentially make any distro “look” like any other (there may be some intricacies that I am unaware of that may get in the way of changing some things without having to alter others); Arch Linux simply gives you most of the choice right up front.

        • Classy@sh.itjust.worksOP
          1·
          10 months ago

          It’s always a heartwarming experience seeing someone passionate about a subject enough that they’d be willing to dedicate what was likely at least twenty minutes of their own free time to writing a detailed response to a stranger on the internet.

          re: /dev/sda haberdashery

          Your explanation was very helpful in explaining the process by which the BIOS is loaded. As I’ve continued to work on Ubuntu, I’ve been trying to hammer out little errors along the way and I believe that I inadvertently identified the problem with my dual-booting situation before. Whenever I load Linux, the system will load that ubiquitous screen where it does a filesystem check, etc, and I always get two errors: (1) VMX (outside TXT) disabled…; (2) ima: error communicating with TPM. I went into the BIOS and figured out how to turn the TPM on, and when I did so… what do you know, I started boot-looping again, just as before. Apparently I’m going to have to do a bit of troubleshooting to get Linux operable with the TPM, if I care enough about it to just undo a simple error message on boot-up that has no impact on my actual computing experience. But having his TPM chip before was causing boot-looping, perhaps due to a security issue with grubx, who knows, but for the time being I’m putting it on the back-burner.

          re: Musescore

          I appreciate the thought, and yes Musescore has been on my periphery a good percentage of my 15 years of using notation software. Musescore is an admirable project and I’m impressed with the steps its taken in the last few updates. Frankly, this has probably been the fourth or fifth time now that someone has hocked Musescore as a FOSS alternative to Finale, and while I get it, they are not truly one-to-one in compatibility, at least not yet. Finale is a boutique program, designed for professional use and it’s very feature-rich, especially as one gets into more specialized concerns in terms of unusual notations, etc. Finale works just fine on my system and I don’t intend on changing away from it anytime soon. I’ve been using it for so many years, it’s like second-nature to me. I couldn’t imagine dropping a software I spent hundreds of dollars on now for something else if I still get great mileage out of it.

          re: Arch Linux

          Following the last time you and I communicated, I actually saw a video from SomeOrdinaryGamers where Muta did a step-by-step installation of Arch on a new machine. It certainly seems more complex than Ubuntu, but at the same time, boy does it give you a rich experience in learning the intricacies of your system and how everything functions together. I am definitely going to be keeping Ubuntu on my main system for the time being, but I do have a blank ZBook15 gen 2 (I believe it has Mint on it right now? I haven’t opened it in a few months…) and I might have a go at installing Arch on it and messing around for a while.

          My current project is going to be taking my secondary HDD, which is only a storage device now, and configuring its file structure to be easier to use with Linux, as well as clearing out all the legacy OS files from when it used to have Windows on it. I’ve been having trouble using utilities like rm -rf because for some reason, some files will delete with no issue, but then others will actually cause the drive to crash in some spectacular fashion, and I have to sudo umount -l then remount again with ntfs-3g just to get back to it. I can’t tell if its a permissions issue or something else. I know the drive is old and there are four damaged sectors, but the most recent SMART test didn’t seem to throw up any major red flags. I can delete individual problem files, but trying to delete a bulk quantity runs into issues at times. It’s weird. I don’t exactly want to format the drive because there’s ~0.9TB of personal files on there (that are all backed up both on a cloud service and an external SSD, no worries!), but so far I’m having fun learning some new commands.