I cannot find anything related to that in their documentation, their about page, or their whitepaper.
They talk a lot about decentralized computing, but any form of secure enclave or code verification isn’t mentioned.
Compare that to this project, which is similar, but incomplete. However, quilibrium uses it’s own language instead of python or javascript, like golem does. The docs for golem do not explain how I am supposed to verify a remote server is actually running my python/javascript code.
No, I think if you’re using the nextcloud all in one image, then the management image connects to the docker socket and deploys nextcloud using that. The you could be able to update nextcloud via the web ui.
https://github.com/nextcloud/all-in-one?tab=readme-ov-file#how-to-update-the-containers
I read through the docs. I’m not sure how this enables trusted computing.
There is concern amongst critics that it will not always be possible to examine the hardware components on which Trusted Computing relies, the Trusted Platform Module, which is the ultimate hardware system where the core ‘root’ of trust in the platform has to reside.[10] If not implemented correctly, it presents a security risk to overall platform integrity and protected data
https://en.m.wikipedia.org/wiki/Trusted_Computing
Literally all TPM’s are proprietary. It’s basically a permanent, unauditable backdoor, that has had numerous issues, like this one (software), or this one (hardware).
We should move away from them, and other proprietary backdoors that deny users control over there own system, rather than towards them, and instead design apps that don’t need to trust the server, like end to end encryption.
Also: if software is APGL then they are legally required to give you the source code, behind the server software. Of course, they could just lie, but the problem of ensuring that a server runs certain software also has a legal solution.
So, officially no. But there are ongoing theories in the r/emulationonandroid subreddit that they are.
I think it could be either way, but it’s unlikely that they are the same person. In both cases, harassment caused them to shut there projects down, which could be a reasanobale coincidence, or could be indicative of a larger harassment campaign.
Crowdstrike didn’t target anyone either. Yet, a mistake in code that privileged, resulted in massive outages. Intel ME runs at even higher privileges, in even more devices.
I am opposed to stuff like kernel level code, exactly for that reason. Mistakes can be just as harmful as malice, but both are parts of human nature. The software we design should protect us from ourselves, not expose us to more risk.
There is no such thing as a back door that “good guys” can access, but the bad guys cannot. Intel ME is exactly that, a permanent back door into basically every system. A hack of ME would take down basically all cyber infrastructure.
Cal state northridge?
https://wiki.archlinux.org/title/List_of_applications/Internet#Pastebin_services
That pages shows how to use curl to upload to 0x0.st.
I’ve used the pastebinit program listed on that page to upload to paste.debian.net, but it supports other sites as well.
Because forgejo’s ssh isn’t for a normal ssh service, but rather so that users can access git over ssh.
Now technically, a bastion should work, but it’s not really what people want when they are trying to set up git over ssh. Since git/ssh is a service, rather than an administrative tool, why shouldn’t it be configured within the other tools used for exposes services? (Reverse proxy/caddy).
And in addition to that, people most probably want git/ssh to be available publicly, which a bastion host doesn’t do.
So, I’m not gonna pretend flatpak doesn’t use more space then normal apps, but due to deduplication (and sometimes filesystem compression), flatpaks often use less space than people think.
[nix-shell:~/Playables/chronosphere]$ sudo /nix/store/xdrhfj0c64pzn7gf33axlyjnizyq727v-compsize-1.5/bin/compsize -x /var/lib/flatpak/
Processed 49225 files, 21778 regular extents (46533 refs), 22188 inline.
Type Perc Disk Usage Uncompressed Referenced
TOTAL 53% 898M 1.6G 3.6G
none 100% 499M 499M 1.0G
zstd 34% 399M 1.1G 2.6G
[nix-shell:~/Playables/chronosphere]$ du -sh /var/lib/flatpak/
1.7G /var/lib/flatpak/
I only have one flatpak app installed, and du
says that takes up 1.7 GB of space… but actually, when using a tool that takes up BTRFS transparent compression into account, only half of that space is used on my disk.
I recommend using compsize for a BTRFS compression aware version of du
and flatpak-dedup-checker
for a flatpak filesystem deduplication aware checker of space used.
I think flatpak absolutely does use up more space, because yes, it is another linux distro in your distro. But I think that’s a tradeoff people accept in order to have a universal package manager for graphical apps.
Also, you can flatpak cli tools. They are just difficult to run at first because you have to do the flatpak run org.orgname.appname
thing, but you can alias that to a short command. Here is a flatpak of micro, a terminal based text editor.
(I prefer nix for cli tools though, and docker/podman/containers for services).
So based on what you’ve said in the comments, I am guessing you are managing all your users with Nixos, in the Nixos config, and want to share these users to other services?
Yeah, I don’t even know sharing Unix users is possible. EDIT: It seems to be based on comments below.
But what I do know is possible, is for Unix/Linux to get it’s users from LDAP. Even sudo is able to read from LDAP, and use LDAP groups to authorize users as being able to sudo.
Setting these up on Nixos is trivial. You can use the users.ldap set of options on Nixos to configure authentication against an external LDAP user. Then, you can configure sudo
After all of that, you could declaratively configure an LDAP server using Nixos, including setting up users. For example, it looks like you can configure users and groups fro the kanidm ldap server
Or you could have a config file for the openldap server
RE: Manage auth at the reverse proxy: If you use Authentik as your LDAP server, it can reverse proxy services and auth users at that step. A common setup I’ve seen is to run another reverse proxy in front of authentik, and then just point that reverse proxy at authentik, and then use authentik to reverse proxy just the services you want behind a login page.
OP is on OpenWRT (a router distro), and Alpine. Those distros don’t come with very much by default, and perl is not a core dependency for any of their default tools. Neither is python.
Based on the way the cosmo project has statically linked builds of python, but not perl, I’m guessing it’s more difficult to create a statically linked perl. This means that it’s more difficult to put perl on a system where it isn’t already there, and that system doesn’t have a package manager*, than python or other options.
*or the the user doesn’t want to use a package manager. OP said they just want to copy a binary around. Can you do that with perl?
Not quite a scripting language, but I highly recommend you check out cosmo for your usecase. Cosmopolitan, and/or Actually Portable Executable (APE for short) is a project to compile a single binary in such a way that is is extremely portable, and that single binary can be copied across multiple operating systems and it will still just run. It supports, windows, linux, mac, and a few BSD’s.
https://cosmo.zip/pub/cosmos/bin/ — this is where you can download precompiled binaries of certain things using cosmo.
From my testing, the APE version of python works great, and is only 34 megabytes, + 12 kilobytes for the ape elf interpreter.
In addition to python, cosmopolitan also has precompiled binaries of:
And a few more, like tclsh, zsh, dash or emacs (53 MB), which I’m pretty sure can be used as an emacs lisp intepreter.
And it should be noted these may require the ape elf interpeter, which is 12 kilobytes, or the ape assimilate program, which is 476 kilobytes.
EDIT: It also looks like there is an APE version of perl, and the full executable is 24 MB.
EDIT again: I found even more APE/cosmo binaries:
You might be able to run the latest KDE or gnome in a distrobox podman or docker container:
https://github.com/89luca89/distrobox/blob/main/docs/posts/run_latest_gnome_kde_on_distrobox.md
I dunno what’s most appropriate for email, but I often joke:
Isn’t open source kinda like a cult?
It’s a not a cult I swear! Just switch to free software, and free yourself!
I’ve also heard my friend say something along the lines of:
Free software, free culture, free people
Or maybe it was free world or free trade? I can’t remember.
Although, for slogans like this, I might go with something that has more of an immediate effect, like shilling an adblocker.
Or the ever so simple:
Anyway, I partially agree with the other poster, but I think a one sentence quip at the end of an email is unobtrusive enough that it gets a pass. Of course, it depends on your specific workplace and how strict they are, but I would assume most workplaces have a little space for humanity.
Yeah, that’s what this uses. But copy’s x86 emulator on their site does not have any sort of networking, while anura seems to use some kind of http proxy to have the vm be fully networked.
You can even install packages and run graphical apps in anura. (Very, very, very slowly).
First things first: Check if any data was actually leaked/breached.
Many times, the data leaks news sites like to report in the most alarmist manner, don’t actually contain any new data, and are just aggregations of older breaches that already happened. Although still worth reporting, sadly, due to the way ads and clickbait works, they are incentivized to play it up and report it as the LARGEST DATA BREACH EVER 2024 CLICK ME IMMEDIATELY.
But yeah. My recommendation: Find high quality sources which either don’t report this stuff, or I like lemmy (and used to like reddit), because when stuff like that gets posted, it gets called out by users in the comments.
I want to like Plasma, really I do, but even when I haven’t chosen it as a DE it overheats my laptop because Baloo File Extractor just won’t fucking quit consuming a CPU core for what seems like hours a day.
I remember having this issue. Basically, it was a bug, where baloo file manager was stuck on a file. After some time (and maybe a reinstall?), and deleting the index, baloo worked fine.
Only vivaldi caught this issue. Brave had this api enabled, most likely on accident.
But the problem is, that chromium is just such big and complex software, when combined with development being driven by Google, it’s just impossible for any significant changes or auditing to be done by third parties. Google is capable of exteriting control over Brave, simply by hiding changes like above, or by making massive changes like manifest v3, which are expensive for third parties to maintain.
Brave can maintain 1 big change to chromium, but for how long? What about 2, 3, etc.
My other big problem with brave is that I see them somewhat mimicking Google’s beginnings. Google started out with 3 things: an ad network, a browser, and a search engine.
Right now, Brave has those same three things. It feels very ominous to me, and I would rather not repeat the cycle of enshittification that drove me away from chrome and goolgle.
Sorry. I meant if you wanted to use only packages from one set of repositories/one distro, for if you were looking for lower level packages like the kernel or desktop environment to be updated.