Howdy y’all, much like the title says, I’m looking to build a Hypercube. I have what was once upon a time an Ender 3 V1 that I’ve rebuilt with an Ender Extender kit. I’m not happy with the aggressive ghosting I get from the 400x400 bed so I wanted to cannibalize the electronics and build the frame from scratch. I was also planning on keeping the bed since it’s got a stick on heater and thermistor that’ll work well with the new setup. Hotend too, probably, since it’s an all metal Micro Swiss.
Any gotchas to look out for? I know belt tension is a biggie once I get it together, but any gotchas to look out for in the build process?
I’m not too nervous about throwing together a custom firmware for this, it’s not my first custom firmware and I’m a software guy by trade so it’s pretty straightforward for me.
But seriously, I don’t think I have the right experience to give specific advice.
Just build the printer, and try not to break anything. Work slowly, and if you mess up, try to understand what went wrong, take it apart and do it again. Watch some YouTube videos if you want to see other people doing it.
When it comes time to print, start with small objects and work through any problems, before wasting filament on big objects.
Hm. That’s all pretty good advice in general, thank you! Though I’m definitely not afraid to break stuff. I think that’s generally how I learn.
The current motherboard in my printer is almost 100% functional except for one specific module that I completely fried (and as a result, my parts fans run at 100% all the time). I may have shorted a couple wires as I was working on some extensions. Whoops! Though as a result of that, I have a much better handle on how wiring works on these things and it’s a lot simpler than I thought originally. The sparks were fun though!
Honestly I sorta wonder if I should document my build process and post it to Lemmy. It might be cool to have a “Here’s how to convert” guide.