I shared a video of the problem, it’s hard to describe with words. Can you help me solve it?

  • JackGreenEarth@lemm.eeOP
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 year ago

    I apparently need hot gloves, I tried without them but burnt my finger and possibly graunched the spanner.

    • CmdrShepard@lemmy.one
      link
      fedilink
      English
      arrow-up
      2
      ·
      1 year ago

      Try a socket as it’ll be less fiddly than a wrench and also has a lot of thermal mass so it won’t get too hot as you loosen the nozzle. I crack it loose with a 1/4" ratchet, then remove the ratchet from the socket and spin the socket and nozzle out by hand. You also don’t need to be super hot, maybe 180C or 190C and you can shut the heater off once it’s cracked loose (then turn it on when threading it back in). Gloves aren’t a bad idea either.

          • JackGreenEarth@lemm.eeOP
            link
            fedilink
            English
            arrow-up
            1
            ·
            1 year ago

            I got a socket just now, but when I unscrewed the nozzle and tried to extrude some filament, the wheel turned but no filament was extruded. I saw a faint strand of unmelted filament in the hole for the nozzle. Here is a video.

            • CmdrShepard@lemmy.one
              link
              fedilink
              English
              arrow-up
              1
              ·
              1 year ago

              You’ll probably want to strip the whole hotend apart and see what the deal is. Without a nozzle, you should be able to just push the filament through by hand (after loosening the tension arm). I wonder if your PTFE tube is bad. Not sure how your extruder is setup, by my direct drive Volcano clone’s filament path is extruder gear > plastic filament guide > PTFE tube > heat break > nozzle. One of those things is bad. Tear it apart and inspect each part for damage and ensure you can easily feed filament through each part.

              • JackGreenEarth@lemm.eeOP
                link
                fedilink
                English
                arrow-up
                1
                ·
                1 year ago

                I’ll have to contact the manafacturers, it shouldn’t be breaking this often when I use it normally.

                • CmdrShepard@lemmy.one
                  link
                  fedilink
                  English
                  arrow-up
                  2
                  ·
                  1 year ago

                  You can if it’s under warranty but this is pretty typical of the hobby unleas you’re buying a real high-end machine.

                  • JackGreenEarth@lemm.eeOP
                    link
                    fedilink
                    English
                    arrow-up
                    1
                    ·
                    1 year ago

                    Really, having a problem every week? Anyway, it is under warranty for the first year, and it’s been just over a month, so I’m safe.